Products

Isogam SHT

SHT30/4x4 SHT45/4x4
SHT35/4x4 SHT50/4x4
SHT40/4x4

Bitumen-polymer material roll waterproofing fusion on a glass-fiber base, manufactured in Iran, as well as manufactured in Turkmenistan. By type of protective layer - materials with film. Designed for the device of roofing carpet of buildings and structures and waterproofing of building structures.

Technical characteristics:
Breaking force not less than 550-600 H
Flexibility on a beam with a diameter of 50 mm. not higher minus -20˚С
Heat resistance +130˚С
Absolute water resistance
Thickness 3; 3.5; 4; 4.5; 5 mm.

Isogam SWT (glass wool)

SWT20/55 SWT25/55

Bitumen-polymer material roll waterproofing fusion on a glass wool base, produced in Iran, as well as China and Turkmenistan. By type of protective layer - materials with a film. Designed for the installation of roofing carpet of buildings and structures and waterproofing of building structures.

Technical characteristics:
Breaking force not less than 300 H
Flexibility on a beam with a diameter of 50 mm. not higher than minus - 15˚С
Heat resistance + 130˚С
Absolute water resistance

Isogam PST

PST30/150 PST35/150
PST40/150 PST 45/150
PST50/150

Bitumen-polymer material roll waterproofing fusion based on combined polyester (reinforced threads) produced in Turkmenistan, also Iran and China. By type of protective layer - materials with film. Designed for the device of roofing carpet of buildings and structures and waterproofing of building structures.

Technical characteristics:
Breaking force not less than 750-950 H
Flexibility on a beam with a diameter of 50 mm.
not higher than minus -15˚С
Heat resistance +130˚С
Absolute water resistance

Note:
At customer's request, heat resistance can be increased to +140, flexibility below minus -12,
to minus -40 °C.

Isogam SHTF

SWTF20/55 SHTF40/4x4
SWTF25/55 SHTF45/4x4
SHTF30/4x4 SHTF50/4x4

Bitumen-polymer material, roll-on,
fusing waterproofing, based on glass fiber, produced in Iran and Turkmenistan, with an upper layer of aluminum foil or
metallized film. Not subject to corrosion and exposure to ultraviolet radiation. Designed for the installation of roofing carpet for buildings and structures and the
external protective insulation layer for heating mains, pipelines, water pipes, and air ducts.

Technical characteristics:
Breaking force not less than 500 H
Flexibility on a beam with a diameter of 50 mm.
not higher than minus -15˚С
Heat resistance +130˚С
Absolute water resistance

Note:
At customer request, heat resistance can be increased to +140-150°C, flexibility below minus -12, to minus -30-40 °C.

Isogam PSTM

PSTM30/150 PSTM35/150
PSTM40/150 PSTM 45/150
PSTM50/150

Bitumen-polymer material roll
waterproofing with mineral dressing fused on a base of combined polyester produced in Iran, also Turkmenistan. Designed for the installation of roofing carpet of buildings and structures and waterproofing of building structures.

Technical characteristics:
Breaking force not less than 500H
Flexibility on a beam with a diameter of 50 mm.
not higher than minus -12˚С
Heat resistance +130˚С
Absolute water resistance

Note:
At customer's request, heat resistance can be increased to +160, flexibility below minus -12,
to minus -25 °C.

Bitumen MASTIC

It is intended for the installation and repair of roofs, as well as waterproofing of underground structures. Does not require heating, applied to a clean surface.

Technical characteristics:
Adhesive strength at 20°C – not less than 0.1 MPa
Fragility minus -25˚C
Heat resistance +50˚C
Water absorption in 24 hours – not more than 0.3%
Drying time 12-24 hours
Complete drying 7 days

Flexible shingles

Flexible shingles - 1
Bitumen-polymer roofing and waterproofing material with mineral dressing, fused on a base of combined polyester (fiberglass). Designed for the installation of roofing carpet of buildings and structures.

Specifications: With a thickness of 3 mm.
Breaking strength of at least 450 H
Flexibility on a beam with a diameter of 50 mm.
not higher than minus -12˚С
Heat resistance +130˚С
Absolute water resistance

Flexible shingles- 2
Bitumen-polymer roofing and waterproofing material based on glass fiber (polyester) with a top layer of aluminum foil or metallized film. Not subject to corrosion and exposure to ultraviolet radiation. Designed for the installation of roofing carpet of buildings and structures.

Specifications: With a thickness of 3 mm.
Breaking strength of at least 500 H
Flexibility on a beam with a diameter of 50 mm.
not higher than minus -15˚С
Heat resistance +140˚С
Absolute water resistance